How-To Guides about Construction Toys

This tutorial video will show you how to build a hovercraft using plywood, a leaf blower, and various other materials. This hovercraft works best on a smooth, flat surface.

The video below demonstrates how you can convert you 2D Photos into 3D Models using 3Defy.

Looking for something fun to do with all those office supplies you've been stealing from work? Or maybe you just want to goof around in your cubicle? It's possible that you are an honest, dedicated, hard worker, but whatever the case may be- no judgement, just a video guide to making an office supply catapult.

Are you looking to build a cool home science experiement? Why not try out a Stirling engine? Wait, what IS a stirling engine? Well... a Stirling engine is a heat engine operating by cyclic compression and expansion of air or other gas, the working fluid, at different temperature levels such that there is a net conversion of heat energy to mechanical work. This project was made from parts around the house and you should be able to do the same. This is a great project to explain how gears work,...

Here's the English language How-To for constructing a Lightercycle using 2 cigarette lighters. Original article courtesy of WonderHowTo user rmansur.

Watch this video for instructions on making the Yukki Cross Artemis scythe from the anime / manga Vampire Knight.

Are you a diehard Harry Potter fan who has always wanted your own wand?

In this tutorial, we learn how to construct a mouse trap car. You will need: wood, string, wood glue, duct tape, scissors, markers, a mousetrap, wheels, and a drill to do this. To start, you will lift the mousetrap up and tape duct tape around it along with a long stick. Then, tape this to a piece of wood. From here, you will glue together two sticks and then put wheels on the top and bottom of it. Next, you will lay the mousetrap on top of this and then push it. Then it will roll away! You can...

Medieval knights did not have access to plastic, but modern reenactors certainly do! This tutorial shows you how to take a food-grade plastic barrel (at least a quarter inch thick) and turn it into a set of medieval style armor!

Most boffer LARPs insist that you add a safe 'stabbing tip' at the end of your foam sword or dagger. This tutorial shows you how you can make a safe stabbing tip using kevlar and foam, which you add to the core of your sword.

An online class on how to build your own boffer sword! Every combat group is different, so make sure this sword is safe by the rules of your boffer larp. This method goes beyond the simple foam and PVC method and teaches you how to use latex to make an awesome looking sword.

This will still hurt if you swing too hard! If you need a realistic looking prop sword, you can follow along with this tutorial to make the prop out of an aluminum bar. You'll need a couple power tools as well, so be careful around them!

This tutorial shows you how to make spell packets. It's designed for NERO, but many larps use the same rules. All you need is a square of natural fiber cloth (like cotton), some birdseed (or rice or crushed walnut shells or any biodegradable matter) and a rubber band.

This tutorial shows you how you can make a stop motion puppet modeled after Brown Jenkin, the eldritch horror that features in in the Cthulhu Mythos of H.P. Lovecraft. Brown Jenkin is a rat familiar with a human face, and this video shows you how to pull off this incredily creepy character.

Make your own armor with a weathered look out of Sintra (or expanded PVC foam). You'll need a heat gun, a padded cushion, paper towels, rub'n'buff in silver leaf, a knife, a marking pencil, water and a can of spray primer. Trace your piece onto the Sintra, then use the heat gun to shape it. Useful for costumes, Halloween or larps.

Playing an Asian-style character for your next boffer larp? If you're looking for a good way to make a jian, or Chinese boffer sword, this is the right tutorial for you! It lays out all the steps, including preplanning, to get precisely the jian you want.

This tutorial shows you how you create a boffer larp safe pair of werewolf claws. Start with some basic heavy gloves, like gardening gloves, then cut out your claws from foam (at least three inches long!), and then follow along with the tutorial to end up with your own awesome monster claws!

In this tutorial, we learn how to accurately read a tape measurement. First, roll out the tape measure, then find the inch marks. These will be in red. From here, you will find the half inch marks between each of the red inches. Half of the half inches will be right in the middle of that, and exactly half of the half! In between this, you will find 3/4 of an inch and 1/8 of an inch. Make sure you have a good view of the lines on the tape measure so you can identify these correctly. The last...